|
Driver Setup for Elan U111-530/630 Adapter for Sierra 860 Aircard |
||
|
Sierra 860 Air Card /
Cingular Phone No: Unique to each customer STEP 1: Install the drivers
for the AC860 onto the system you intend to use the U111 with. STEP 2: Insert the CD that
came with the U111 into your STEP 3: Plug-in the Elan
U111 without the Sierra AC860 inserted. You should see a new hardware device
detected menu. Follow the steps on the installation instructions. The CD
contains the driver you will need to select in the drivers directory.
(D:\Drivers note: D is the STEP 4: Insert the modem
into the U111 and a new hardware found message should appear. Select
automatically find the drivers for it and the system will install the previously
loaded drivers for you… You can check the installation when finished by going
into the Device Manager as in step 3 above. Look for the Sierra Wireless modem
in the Modem grouping. To be sure
you have it installed correctly Find:
Modems “Sierra
Wireless AirCard 3G Modem” RightClick,
Diagnostics, Query Modem: Command
Response ATQOV!EO
Success RightClick,
Properties, Advanced: Find
“Extra Initial Commands”, Type: at+cgdcont=1,"IP","isp.cingular" Click
OK STEP 5: Exit Device Manager,
DoubleClick: My Computer, Control Panel, Network Connection, Create A New
Connection, Wizard, Next: Connect to the
Internet, Next: Connect Using A Modem, Next ISPNAME:
GPRS PHONE:
*99***1# NAME:
ISP@CINGULARGPRS.COM PASSWORD: CINGULAR1
| New
Products | PCMCIA Cards / Readers
| Industrial Memory
Products | SRAM & Linear
Flash
| Copyright© 1995 ~ 2007 Primary Simulation,
Inc. (PSI) |