BTP-M270 Impact Receipt Printer
BTP-M270 is a low cost point-of sale (POS) printer, based on the impact dot-matrix printing technology. The printer is compatible with the market leaders. This printer not only operates in a horizontal position on a table but also operates when positioned vertically.
For mounting the printer on a wall no additional hardware other than two plugs and screws is needed.
-
Easy, drop-in paper loading (max. 10cm diameter)
Two color printing (black/red)
-
Integrated cutter (tear-off, fill cut, partial cut)
-
Two-directional paper-low sensor system
-
Programmable internal buzzer system
-
Field replaceable interfaces (“daughter boards”)
-
Printer setting by software or key-strokes
-
Available in colors black, ivory and silver
-
Can operates in horizontal and vertical position on table
-
Wall mounting without additional brackets
-
Optional cover for internal power adapter
Specifications:
| Printing Method | 9-pins, serial impact dot-matrix printing |
| Column Capacity | 40/42 or 33/35 |
| Ribbon | Commercially available (colors black, purple and black/red) |
| Data Buffer | 4 kB or 40 bytes |
| Memory | Total: 128 KB RAM and 1 MB flash (2 MB optional); User available: 8k RAM and 128 k Flash |
| Printing Modes | Standard mode, bit-image mode |
| Print length | Standard mode: no limit |
| Interfaces | Daughter boards: Centronics, RS232C, Ethernet, WLAN |
| User Defined Information | Can be down-loaded to RAM or Flash (e.g. fonts, graphics, bit-maps) |
| Character Modification | Enlarge (1-2 times), Emphasize, Underline |
| Paper Types | Normal paper (Continuous roll); One-ply or two-ply paper (1 original + 1 copy) |
| Paper Width | 57.5 ± 0.5 mm, 69.5 ± 0.5 mm, 76.0 ± 0.5 mm (by adjustable paper separator plate) |
| Diameter Paper Roll | Max. 100 mm |
| Paper Cutting | Tear-off, full cut, partial cut |
| Cutter Lifetime | 1,000,000 cuts (standard paper; thickness: 0.06 mm) |
| Power Supply |
External adapter; Input: 100- 240VAC, 50/60
Hz; Output: 24 VDC, 2.5A |
| Dimensions (DxWxH) | New weight printer is 3.2 kg; 4.0 kg with Power Supply, Cable & Package |
| Weight | ABS Plastic & Rubber |
| Operating Temp | +5 - +45 degree C |
| Operating Humidity | 20% -90% RH (no condensation) |
| Quality Figures | MTBF: 180,000 hours; MCBF: 18,000,000 lines |
Price: click here
WARRANTY &
SUPPORT. Tech support
from manufacturer and PSI. For tech support
and/or RMA, please go to http://www.psism.com/support.htm. 1
year warranty.
TO ORDER OR INQUIRE. Please click here to place an online order or send e-mail inquiry to sales@psism.com or call (301) 572-2168. We accept Visa, MasterCard, Discover and American Express as well as government and university POs. International orders may be conditionally accepted. Please click here to order or view our ordering information page.
| New
Products | PCMCIA Cards / Readers
| Industrial /
Rugged Memory Products | SRAM
& Linear
Flash
|
| SATA
& IDE
Flash Drives | Industrial
ATA & CF
Cards | Embedded Memory
| Tronlink
Products |
Copyright© 1995 ~ 2011 Primary
Simulation, Inc. (PSI)
2963 Mozart Drive, Silver Spring, MD 20904 U.S.A.
Tel:(301) 572-2168, Fax: (301) 847-0739
10:00AM ~ 6:00PM U.S. Eastern Time
Email: sales@psism.com