IDE PC Card Readers (Models IIA2 & IIA3) 
for Type I, II & III ATA Flash Cards and Hard Disk Cards

Model IIA3

   

Note: 
1. These readers will not support any non-storage cards, such as modem, ethernet, wireless LAN, SCSI, bluetooth, etc. cards.

2. Model IIA3 accommodates type I, II & III ATA and hard disk cards. No driver needed.

3. They can also read/write SmartMedia, memory stick, SD/MMC and CF cards with the proper PC card adapters.

4. This model can also be used on Akai MPC2000 drum machine or the like that has an IDE expansion port.

• Perfect solution for accessing various flash cards on desktop or book-size PC via IDE/ATAPI interface.
• Support ATA Flash Card, or any other card adapters via CF or PC Card.
• Fully compatible with ATAPI removable/re-writable media interface and PIO mode 4.
• Some (not all) PCs can boot directly from this drive just like booting from hard disk drive. (See note below.)
• Card can be inserted/extracted dynamically without shutting down the system.
• Provides front panel fits both 3.5" and 5.25" (mounting bracket required) desktop drive bay.
• Active LED indicator of Access (Read/Write).
• Adopt native driver provided by Windows 98/98SE/Me/NT 4.0+SP6 /2000 & XP.

	Data transfer rate:  Theoretically, the data transfer rate of IDE bus is 16.6 MB/SEC. However, the real data transfer rate is lower because of the limitation of flash memory card.
	Is the drive bootable?  Some computers (not all) can simply select "Boot from ZIP" option available from BIOS setup. The device support only one drive letter like Zip drive. You can't make the drive as C:. Manufacturer does not claim all computers can boot from this drive and they will not tech support for this bootup function!  If your PC hangs during reboot, please remove the media in the drive.
	Does it run under plain DOS (not under DOS-box in Windows)?  No. The device is an ATAPI device and requires device driver to operate. There is no plan to develop DOS driver for it at this moment.

The IIA- IDE Interface ATA Card Readers provide you the easiest and fastest way to access your ATA Flash Cards. IIA utilizes IDE/ATAPI interface, which is generic driver supported by Windows system, let you install and use the reader easier than ever before.

IIA readers provide one socket for ATA Flash Card. The front panel makes it easier to insert or extract your storage cards, and you can use one card once as you wish to access data to or from the storage card.

IIA supports PIO Mode 4, and the max. data transfer rate up to 16.6 MB per sec.. IIA also supports Plug n’ Play, and no additional software driver required to install it on platforms with Windows systems.

• Socket:
  Type I/II/III ATA Flash Card socket x 1
• System Requirements:
  IBM PC compatible computer
  *with IDE/ATAPI support x 1                                                                     
  *Available 3.5"  disk drive bay x 1. ( To use on a 5.25" drive bay, you need the optional mounting kit.)
  *Windows 98/98 SE/ME/NT 4.0 + SP6/2000/XP
• Interface:
  Internal IDE/ATAPI device
• Power supply:
  DC+5v from system’s power supply
• Dimensions:
  D147.8 x W101.6 x H25.4 mm
  (Standard 3.5" device)
• Data transfer rate:
  16.6 MB/sec. Max. (PIO Mode 4)
• Environment:
  Temperature: Operating temperature: 0^oC~70^oC
  Storage temperature: -40^oC~70^oC

Relative humidity: Operating RH: 15~80%
Storage RH: 95%

Safety Standards Compliance:

• FCC Class B
• CE
     

• 1 year limited warranty

• Tech Support from PSI and the manufacturer