Sandisk industrial grade compact flash cards

Sandisk Industrial Grade CF Cards

SANDISK INDUSTRIAL PART # DECODER

Below you will find the Part Number Decoder for your SanDisk product.

INDUSTRIAL COMPACT FLASH CARD SPECIFICATIONS


Specification	Standard Grade	Industrial Grade
System Performance *Notes 1 & 2	SDCFB(I)-YY-201-00	SDCFB(I)-YY-201-80

Start-up Time
Sleep to Write	2.5 msec max.	2.5 msec max.
Sleep To Read (CMD to DRG)	20 msec max.	20 msec max.
Reset to Ready	50 msec typical 400 msec max.	50 msec typical 400 msec max.
Data Transfer Rate to/from host	20.0 MB/sec burst	20.0 MB/sec burst
Active to Sleep Delay	Programmable	Programmable
Controller Overhead Command to DRQ	20 msec max	20 msec max

Power Requirements *Note 1

DC Input Voltage
Commercial Temp.	3.3 V ± 10%, 5 V ± 10%	3.3 V ± 10%, 5 V ± 10%
Extended Temp.	3.3 V ± 10%, 5 V ± 10%	3.3 V ± 10%, 5 V ± 10%

Power Dissipation *Notes 3 & 4

Sleep (up to 512MB)	300 µA(3.3V) 500 µA(5V)	300 µA(3.3V) 500 µA(5V)
Sleep (>512MB to <1.5GB)	600 µA(3.3V) 800 µA(5V)	600 µA(3.3V) 800 µA(5V)
Sleep (1.5GB and higher)	1 mA(3.3V) 1.2 mA (5V)	1 mA(3.3V) 1.2 mA (5V)
Read	50 mA(3.3V) 55 mA (5V)	50 mA(3.3V) 55 mA (5V)
Write	65 mA(3.3V) 70 mA (5V)	65 mA(3.3V) 70 mA (5V)

Specification	Standard Grade	Industrial Grade
Environmental Specifications
Temperature:
Operating Commerical	0°C to 70°C	0°C to 70°C
Operating Extended	-40°C to 85°C	-40°C to 85°C
Non-Operating Commerical	-25°C to 85°C	-25°C to 85°C
Non-Operating Extended	-50°C to 100°C	-50°C to 100°C

Humidity:
Operating	8% to 95%, non-condensing	8% to 95%, non-condensing
Non-Operating	8% to 95%, non-condensing	8% to 95%, non-condensing
Acoustic Noise (at 1 meter)	0dB	0dB

Vibration:
Operating	15 G peak to peak max.	30 G peak to peak max.
Non-Operating	15 G peak to peak max.	30 G peak to peak max.

Shock:
Operating	2,000 G max.	3,000 G max.
Non-Operating	2,000 G max.	3,000 G max.

Altitude (relative to sea level)
Operating/Non-Operating	80,000 feet max.	80,000 feet max.

System Reliability and Maintenance
MTBF (Mean Time Between Failures)	>1,000,000 hours	>3,000,000 hours
Preventive Maintenance	None	None
Data Reliability	<1 non-recoverable error in 10¹⁴ bits read	<1 non-recoverable error in 10¹⁴ bits read
Endurance	300,000 cycles commercial	2,000,000 cycles commercial
	100,000 cycles extended	600,000 cycles extended
Specification	Standard Grade	Industrial Grade
Physical Specifications
Length	1.433 in (36.4 mm)	3.370 in (85.6 mm)
Width	1.685 in (42.8 mm)	2.126 in (54.0 mm)
Thickness (Body)	0.130 in (3.30 mm)	0.1968 in (5.0 mm)
Thickness (Removable Edge)	0.155 in (3.94 mm)	N/A
Weight	0.40 oz (11.4 g)	1.16 oz (33 g)

Ordering Information
Order Model #	SDCFBX-YY-201-00 = default	SDCFBX-YY-201-80 = default
	SDCFBX-YY-202-00 = no Multi-Word DMA	SDCFBX-YY-202-80 = no Multi-Word DMA
	SDCFBX-YY-203-00 = Removable in IDE	SDCFBX-YY-203-80 = Removable in IDE
	SDCF-03 CompactFlash Adapter	SDCF-03 CompactFlash Adapter
Where X:	I = Extended Temp. Blank = Commerical Temp.	I = Extended Temp. Blank = Commerical Temp.
YY:
16	N/A	16.1 MB
32	32.11 MB	32.11 MB
64	64.2 MB	64.2 MB
128	128.4 MB	128.4 MB
256	256.9 MB	256.9 MB
384	N/A	384.5 MB
512	512.5 MB	512.5 MB
1024	1024.9 MB	1024.9 MB
2048	2048.9 MB	2048.9 MB
4096	4097.8 MB

Note 1: All values quoted are typical at ambient temperature and nominal supply voltage unless otherwise stated. Note 2: All performance timing assumes the controller is in the default (i.e., fastest) mode. Note 3: Sleep mode currently is specified under the condition that all card inputs are static CMOS levels and in a "Not Busy" operating state. Note 4: The currents specified show the bounds of programmability of the product. Specifications are subject to change without notice.

PRICE. Please click here for updated price.

WARRANTY & SUPPORT. Tech support from manufacturer and PSI. 7 year warranty.

TO ORDER OR INQUIRE. Please click here to place an online order or send e-mail inquiry to sales@psism.com or call 1(301) 572-2168. We accept Visa, MasterCard, Discover and American Express as well as government and university POs. International orders may be conditionally accepted. Please click here to order or view our ordering information page.

PSI Home Laser Balls