Home / About Us
Support / RMA
Search Our Site
Place An Order
View Your Cart
 
New Products
  
Industrial Storages
  PCMCIA ATA Cards
  Rugged CF Cards
  IDE Flash Drives
  Industrial MIDE Drives
  Industrial SRAM 
  Linear Flash Cards
  Car Scanner/Tester
  IPC/SBC, Embedded
  Rugged & High Temp.
  Data Loggers
  Precision Agriculture
  Routers & Switches

  

Computer Products

  PCMCIA Products

  Memory Products

  ExpressCards

  USB & Firewire
  Data Backup/Storage
  Wi-Fi & Bluetooth
  Audio/Video/Display
  PC Power Adapters
  Memory Adapters
  Laptop Accessories
 
Consumer Electronics

  Laser Baseballs

  Electronic Toys/ Kits

  3D Photo Prints

Specials

Place An Order

PCI Intrnal Universal PCMCIA Card Readers


These PCI universal PC card readers/bridges below will simplify your life in data transfer between your palmtops, cameras, laptops, desktops and other data collection devices. Please click on the following models.
   

   
These readers support not only storage cards (ATA flash, PCMCIA hard drive, linear flash*, SRAM*, compact flash**, smartmedia**, microdrive**, memory stick**, Multimedia (MMC)**, etc.) as well as other non-storage cards ( ethernet, modem, wireless LAN, wireless modem, SCSI, serial I/O,  PCMCIA-to-IDE, etc.).


* Linear flash & SRAM cards may need third-party software to work under Win NT and 2000. Please see note at http://www.psism.com/sram.htm
** Need PCMCIA adapter.

Note: 

1. If you use Compaq Deskpro EN, EN (SFF) and EN (SFF-v) Series computers or Dell Dimension 4100 and other PCs using Intel 815 chipset motherboard, BOIS upgrade may be needed in order to avoid hardware conflicts.

2. You do not need a separate driver for for these PCI-based PC card readers/writers under Windows XP. Let Win XP to find these readers and install native driver automatically.

3. We do not guarantee these readers/writers will work under UNIX or Linux system. 

* In order to make it work, your Linux  version must contain one of the following Card Services files:
       1. pcmcia-cs-3.3.8, or
       2. pcmcia-cs-3.0.14
 
Make sure your Linux also has the needed driver, which we do not provide,  for the PC card you want to use!!!!

 

PCI BUS 1 REAR
ACCESS SLOT PC CARD DRIVE                                  
Model PCD-101CS 
Do not use the driver on diskette for Windows XP which supplies its native driver for the readers.

    
Features:

  • Model PCD-101CS   One rear-access socket supports 3.3/5V 16-bit & 32-bit cardbus PC cards

  • Complies with PCI Local Bus Specification 2.1

  • Complies with PCMCIA PC Card 95  Standard Specification

  • Supports Type I, Type II, Type III PC Card Sockets

  • Supports all kinds of PC Card HOT-SWAPPING features (except Win NT)

  • Win NT does not support hot-swapping. You may need CardWare drivers for Win NT to make PC cards hot-swappable.

  • Active LED indication of busy

  • No need for any ISA IRQ Board

  • Supports Windows 95, 98, 98SE, 2000 & Linux *(see note at top). Do not need driver when installed under Win XP. Windows NT driver is optional.

  • Supports ATA Flash Card, CF Card w/ CF Adapter, SM w/ SM Adapter, IBM Microdrive, type III Hard Drive, Sony Memory Stick w/ Stick Adapter, 5V Linear Flash Cards (AMD C & D etc. chipsets), SRAM Card, Fax Modem Card, LAN Card, Wireless LAN card, I/O card, etc.

  • PCI interface card dimension: 4 3/4"x 3 9/16"

  • Max. Power Supply on sockets:
    VCC at 3.3V for 1A
    VCC at 5.0V for 1A
    VPP at 5.0V for 250mA
    VPP at 12V for 250mA

  • 1 year warranty

 

Please click here for pricing and other information.
    

PCI BUS 2 REAR
ACCESS SLOTS CARDBUS CARD DRIVE              

Model PCD-202CS uses
Ricoh R5C476II chipset
Do not use the driver on diskette for Windows XP which supplies its native driver for the readers.



The PCD-RP-202CS PCMCIA Card Drives are the most economical method to add PCMCIA functionalities to the desktop PCs. The Interface Card is an AT PCI card which adds two PCMCIA sockets on the rear of the computer. These PCMCIA Card Drives provide a rear-access PC Card socket solution for the desktop users. They support one Type III PC Card or two Type I or II PC Cards. 

Note: 

1. If you have a Compaq Deskpro model PC and/or if you use a wireless modem or wireless LAN card, this model is preferred. This model is recommended for use with wireless LAN & wireless modem PC cards, like Verizon/Sierra Aircard 550, 555D, 750, 5240, etc. It is also recommended by RayMarine for working with their GPS and radar products. 

2. If you use a 32-bit Cardbus card, Win 98SE may not be automatically detect it. You need to go to control panel to "Add Hardware", the, the card will be detected.

Note: For customers who use PCMCIA wireless cards:

Most of the wireless cards on the market now are 32-bit cardbus cards so you have to use a PCI-based internal 32-bit PC card reader like PCD-RP-202CS, PCD-101CS, P222, P111, etc. listed here. If you are sure your card is a 16-bit one, you can also use the 16-bit front-mount readers like PCD-220E and P423.

PSI does not guarantee the above PCI-based PC card read-writers will 100% work for your Verizon or Sierra Aircards or Kyocera or Novatel, or Qualcomm, etc. wireless cards. The failure is due to a  complex combination of your PC hardware, it's BOIS, your O/S setup and your wireless modem driver. Windows 98, ME & XP normally has fewer problems than Windows 2000

Features:

  • Two rear-access sockets support both 32-bit CardBus PC Cards and 16-bit PC Cards, 3.3V, 5V & 12V

  • Complies with PCI Local Bus Specification 2.1

  • Complies with PCMCIA PC Card 95 / CardBus standard specification

  • Supports Type I, Type II, Type III PC card sockets

  • Supports all kinds of PC Card HOT-SWAPPING feature (except Win NT)

  • Win NT does not support hot-swapping. You may need CardWare drivers for Win NT to make PC cards hot-swappable.

  • Active LED indication of busy

  • No need for any ISA IRQ Board

  • Supports Windows 95, 98, 98SE, 2000, XP & Linux *(see note at top). Do not need driver when installed under Win XP.  Windows NT driver is optional.

  • Supports ATA Flash Card, CF Card w/ CF Adapter, SM w/ SM Adapter, IBM Microdrive, type III Hard Drive, Sony Memory Stick +Stick Adapter, Linear Flash Cards (AMD, Intel II & II+, etc. chipsets), SRAM Card, Fax Modem Card, LAN Card, Wireless LAN card, I/O card, Cardbus card, etc.

  • PCI interface card dimension: 6"x3.5"

  • Max. Power Supply on sockets:
    VCC at 3.3V for 1A
    VCC at 5.0V for 1A
    VPP at 5.0V for 250mA
    VPP at 12V for 250mA

  • 1 year warranty

Please click here for pricing and other information.
    

FRONT ACCESS 2-SLOT PC CARD DRIVE            
Model PCD-220S or PCD-TP-220S
, Softex driver. 

Do not use the driver on diskette for Windows XP which supplies its native driver for the readers. If installation problems arise, please click here for tech support.


Model: PCD-220S

PCMCIA Card Drive uses friendly access to the PC. The two built-in PCMCIA sockets in the 3.5" front Drive Unit came with the ribbon cables that connects the Interface Card. This PCMCIA Card Drive provides two front-access PCMCIA sockets solution for the desktop PC. There are two PC Card sockets that can be used for one Type III PC Card and one Type II PC Card simultaneously in this unit. It fully supports for all of your PC Cards.

       
Features:

  • Two front-access 3.3V & 5V, 16-bit (PCMCIA 2.1 / JEIDA 4.2) PC Card Sockets.

  • Complies with PCI Local Bus Specification 2.1.

  • Complies with PCMCIA PC Card 95 Standard Specification.

  • Supports Type I, Type II, type III PC Card Sockets.

  • Active LED indication of busy.

  • PCMCIA front panel fits both 3.5" and 5.25" desktop drive bays.

  • No need for any ISA IRQ Board.

  • Supports Windows 95, 98, 98SE, 2000, XP & Linux *(see note at top). Do not need driver when installed under Win XP. Model PCD-220E also supports Win NT4.

  • Supports all kinds of PC Card HOT-SWAPPING feature (except Win NT)

  • Win NT does not support hot-swapping. You may need  CardWare drivers for Win NT to make PC cards hot-swappable.

  • Supports ATA Flash Card, CF Card w/ CF Adapter, SM w/ SM Adapter, IBM Microdrive, type III Hard Drive, Sony Memory Stick +Stick Adapter, Linear Flash Cards (AMD, Intel II & II+, etc. chipsets), SRAM Card, Fax Modem Card, LAN Card, Wireless LAN card, I/O card, etc.

  • Max. Power Supply on sockets:
    VCC at 3.3V for 1A
    VCC at 5.0V for 1A
    VPP at 5.0V for 250mA
    VPP at 12V for 250mA

  • PCI interface card dimension: 6"x3.5"

 

PRICE.  Please click here for updated price.
    

WARRANTY & SUPPORT.  Tech support from manufacturer and PSI. 1 year warranty. For tech support and/or RMA, please go to http://www.psism.com/support.htm
   

TO ORDER OR INQUIRE.  Please click here to place an online order or send e-mail inquiry to sales@psism.com or call 1(301) 572-2168. We accept Visa, MasterCard, Discover and American Express as well as government and university POs.  International orders may be conditionally accepted. Please click here to order or view our ordering information page.


New Products  |  PCMCIA Cards / Readers   |  Industrial / Rugged Memory Products   |  SRAM & Linear Flash   |
Embedded  Memory    |   Consumer Electronics  Tronlink Products  |

Copyrightę 1995 ~ 2013 Primary Simulation, Inc. (PSI)
2963 Mozart Drive, Silver Spring, MD 20904  U.S.A.
Tel:(301) 572-2168,  Fax: (301) 847-0739
10:00AM ~ 6:00PM U.S. Eastern Time
Email: sales@psism.com